Logo Left

ANAND SYSTEMS ENGINEERING PVT LTD

MUMBAI SUBURBAN, MAHARASHTRA

Latitude: 19.0993912

Longitude: 72.8819057

ABOUT THE ZED ASSESSMENT REPORT

The MSME Sustainable (ZED) Certification is a scheme of Ministry of MSME to facilitate, assess and certify the applicant MSME based on a matrix of Quality, Productivity, Environment, Energy and other Parameters, leading to the following Certification Levels:


This report is an outcome of an assessment (Desktop or Remote or Site, as per Certification Level) of the applicant MSME’s unit based on the requirements as laid down in the relevant Certification Level. The intent of this report is to provide information useful for the MSME for it to strengthen its systems and processes and move ahead on the journey of ZED.

In this report, findings are presented on an exception basis only.

DISCLAIMER

This disclaimer governs the use of this report. By using this report, you accept this disclaimer in full.

  1. This is an electronically generated report/transcript. It does not require any signature.
  2. The Certification is voluntary and the report provided pertains to the systems and processes of this unit only.
  3. This report is for the purpose of summarizing the outcomes of the assessment process for the applicant Unit as per the information provided by the Applicant.
  4. The assessment has been conducted subsequent to the undertaking by the MSME that it complies with and fulfils all relevant and applicable regulatory and statutory norms/licenses/requirements pertaining to the functioning of this manufacturing unit. Any deviation from this undertaking may result in recall/withdrawal of the Certification provided.
  5. The Certification is valid only for a period of 3 years from the date of issue as mentioned on the Certificate, subject to surveillance assessment (as applicable) conducted within the validity period. The cost of surveillance will be borne by the applicant MSME.
  6. This Report contains a summary of assessment findings as validated through the assessment which is based on the requirements of the relevant ZED Certification Level.
  7. The ZED logo can only be used by those MSMEs which have successfully achieved a Certification (Bronze, Silver or Gold). The guidelines regarding logo usage are being sent separately.
  8. This report has been made for the exclusive use and benefit of the MSME assessed and Ministry of MSME or any of its implementation partner will not accept any liability that may arise if this report is used for any purpose other than intended for nor to any third party in respect of this report.
  9. This report is not an alternative to legal / financial / taxation / accountancy / other advice from an appropriately qualified professional.
  10. Ministry of MSME or any of its implementation partner do not represent, warrant, undertake or guarantee that the use of information or guidance (if any) in the report will lead to any particular outcome or result.
  11. While every attempt has been made to ensure the veracity of this report, Ministry of MSME and QCI are not responsible for any errors or omissions, or for the results obtained from the use of the information contained herein. All information in this report is provided “as is”.
  12. Information not disclosed by the applicant MSME could alter the findings outlined in this report. In such situations, Ministry of MSME reserves the right to withdraw or amend it opinions/suggestions, conclusions and Certification provided.
ASSESSMENT SUMMARY
Unit Name ANAND SYSTEMS ENGINEERING PVT LTD
Udyam Registration Number UDYAM-MH-19-0060986
Enterprise Type Micro
NIC Sector (2 Digit) 28-Manufacture of machinery and equipment n.e.c.
Unit Address Flat No:- 114, Building:- ACHARYA INDUSTRIAL ESTATE, Road/Street:- TEJPAL COMPOUND, ANDHERI KURLA ROAD, Village/Town:- SAKINAKA, Block:- , City:- MUMBAI MUMBAI SUBURBAN MAHARASHTRA-400072
Certification Date December 31, 2025
Latitude: 19.0993912: Longitude: 72.8819057

ZED CERTIFICATION LEVEL

Awarded to the applicant MSME after fulfilling all requirements of this Certification Level as laid down in the MSME sustainable (ZED) Certification Scheme Guidelines of Ministry of MSME


BASIC INFORMATION

Information contained in this section is as provided by the applicant MSME, relevant to the requirements contained in this Certification Level. The Photographs depicted are geo-tagged & time-stamped and have been uploaded by the applicant through the ZED online systems.

Site Exterior Picture

Site Exterior Picture

S.No Fields Input
1 Whether 3rd Party Financial Audits are conducted? No
2 Product manufactured
Product Name Whether Exported Product Photo Product Description Photo Conformance Assessor Remarks
Dsl Busbar system, Radio remote Control System, C- Rail Festooning System, Thruster Brake, Resistance Box, Master Controller, Limit Switch, Anti collision Device Yes
Yes Product name & Description are matching with product photo including latitude and longitude.
3 Key Domestic Customers Power Mech Engineer, Shree Bhagwati, Jsw Limited, Bharat Heavy Electrical Ltd, Maharashtra Seamless Limited
4 Key International Customers Lamco Engineer, Moon Technical & Industrial Service Llc, Ayoon Sohar Electric.
5 Whether Raw Material is Imported? No
Raw Materials
Raw Material Name % of Raw Material Imported Name of Country
6 Processed Outsourced, if any? No
7 Energy Source(s) Used Electricity
ASSESSMENT FINDINGS

To ensure transparency in the assessment process, the entire process (documents, photographs, comments etc.) is captured on a secured ZED server. No physical document (as evidence) has been sought. The data/evidence captured is not shared externally with anyone, except with the relevant stakeholders involved for award of Certification.

1. Leadership

Code Requirement Conformance (Yes/No) Assessor Remark
1.1
Roles & Responsibilities at all levels are clearly defined
Yes Considering various evidences attached here, it seems that roles and responsibilities are well defined.
1.2
Regulatory compliances are reviewed periodically
Yes Consider documenting the Legal requirements and the compliance Status of all the Legal requirements applicable to your MSME (e.g Factory License details, Fire NOC, Form 10, Form 11, MSME registration certificate, etc.)

2. Swachh Workplace

Code Requirement Conformance (Yes/No) Assessor Remark
2.1
Processes for cleaning & hygiene are in place addressing the nature of product, processes, customer & regulatory requirements
Yes Evidences attached here are confirming that Cleanliness and hygienic conditions are maintained with respect to the nature of product, processes & customer requirements.
2.2
All equipment, tools, work spaces & areas are maintained clean, uncluttered & organized as defined & required
No All area's board is missing...

3. Occupational (Workplace) Safety

Code Requirement Conformance (Yes/No) Assessor Remark
3.1
Safety risks are identified and measures are taken to eliminate or minimise them
Yes Considering the evidences attached in Clause no. 3.2, safety risks are covered and measures have been identified and available.
3.2
Relevant PPEs are used by the employees
Yes Fire extinguisher is available with positive pressure in attached pressure gauge including it's fill/refill date and serial no. Safety posters are available at the site. Worker is working with required PPEs for allotted specific job. Training on Safety is provided.
3.3
Safety trainings are imparted to all relevant people
No signature is missing..

4. Measurement of Timely Delivery

Code Requirement Conformance (Yes/No) Assessor Remark
4.1
Mechanism to record deliveries is in place
Yes Mechanism of delivery records is evident through the attachment in Clause no. 4.2.
4.2
Adherence to process delivery contracts is measured
No Signature is missing or not validate.

5. Quality Management

Code Requirement Conformance (Yes/No) Assessor Remark
5.1
Quality requirements for products and processes are established and monitored
Yes Organization shall ensure Quality requirements for products and processes are established and monitored.
5.2
Training is imparted to all relevant people
Yes Agency Remark:Quality training records are not available.

6. Energy Management

Code Requirement Conformance (Yes/No) Assessor Remark
6.1
All energy sources are identified & targets are set for energy saving
Yes Organization shall ensure Energy management and conservation requirements for products and processes are established and monitored.
6.2
Employees are trained in energy management
Yes Organisation shall ensure that people are trained for energy management and conservation area.
6.3
Posters encouraging energy conservation are displayed
Yes energy conservation related poster are evident.

7. Measurement & Analysis

Code Requirement Conformance (Yes/No) Assessor Remark
7.1
Following is measured and reviewed by the Senior management:
  • Rejections
  • Energy Savings
  • Customer Complaints
No Signature is missing.AGENCY REMARKS:Record of customer rejections, complaints, and energy expenses is not available.
Non Conformance 1

2. Swachh Workplace

Code Requirement Conformance (Yes/No) Assessor Remark
2.2
All equipment, tools, work spaces & areas are maintained clean, uncluttered & organized as defined & required
Yes

3. Occupational (Workplace) Safety

Code Requirement Conformance (Yes/No) Assessor Remark
3.3
Safety trainings are imparted to all relevant people
Yes

4. Measurement of Timely Delivery

Code Requirement Conformance (Yes/No) Assessor Remark
4.2
Adherence to process delivery contracts is measured
Yes As per the attachments, records of delivery to proves that process delivery contracts is being measured.

7. Measurement & Analysis

Code Requirement Conformance (Yes/No) Assessor Remark
7.1
Following is measured and reviewed by the Senior management:
  • Rejections
  • Energy Savings
  • Customer Complaints
Yes
WAY FORWARD

Quality improvement models vary in approach and methods; however, a basic underlying principle is that quality improvement is a continuous activity and not a one-time thing. As you implement changes, there will always be concerns to address and challenges to manage. The ZED Model strives to assist you in moving incrementally towards your improvement goals. Today's global business environment calls for organizations to develop, implement and maintain effective quality management systems. While the objectives of quality improvement are clear, the roadmap to reaching a superior quality operation, though more difficult and complex, is achievable when practiced.

Compared to large companies, MSMEs actually have a significant advantage in implementing environmental friendly practices. The small scale of operations makes it flexible to adapt with constantly changing regulation or environmental requirements. Environmental sustainability is a major focus in today’s business world. Companies across all sectors explicitly state environmental concerns as being part of their management agenda. Businesses are striving to be more responsible towards the environment, whether by reducing their operational impact, by working towards a sustainable environment or by taking preventive measures. It is hence imperative that MSMEs realize the significant advantages of inculcating quality practices in their processes and adopting environment-friendly initiatives. We encourage you to adopt such measures and are confident that you will understand and prioritize your business needs by helping identify any deficiencies or shortcomings that need to be overcome, thereby performing better on the ZED parameters.

We urge you to leverage the competence of ZED trained consultants who will share their expertise and knowledge to help your business attain goals and solve problems. These trained professionals will view the situation from a fresh perspective and can act as a catalyst for change. A Consulting Organization will be allocated to you after a due process after you have achieved a minimum Bronze rating and you will also be eligible for financial support if you opt for this component. After the handholding process is complete, you have an option to apply for a higher Certification Level (if applicable) if you are confident that your processes have considerably improved.

You will also be eligible to avail various others benefits and incentives after achieving a Certification Level. Please log-on to the ZED Portal to know more.

Finally, we urge you to explore participating in various schemes offered by the Government, for example schemes related to Technology Upgradation, Lean Manufacturing, Intellectual Property Rights, etc., which are aimed at encouraging, enhancing and handholding the MSMEs resulting in improved quality, enhanced productivity & higher profitability of the enterprises and making them adopt environment friendly technologies. To know more about the Ministry of MSME Schemes, please visit: http://msme.gov.in.

All the best!

The quality movement in product manufacturing and delivery of service has undergone change from its initial emphasis on quality through inspection, to the present-day emphasis on quality through the development of robust processes capable of performing consistently in developing products and services that meet and exceed user needs and expectations.

Drury, Eklund: 1997

ZEDMSME569150/ASSESSMENT REPORT